Call4Cloud | MMP-C | Autopilot | Device Preparation

Married with System Boards’s: 976-TPM

Patch My Pc | install & update thousands of apps

This blog will discuss why “Things” could break with your totally TPM Protected Autopilot Azure Ad Joined device when your System board is replaced!

1. Introduction

It’s all about the Device Key (DKPriv/DKPub), the Storage / Transport key (TKPub/TKPriv), and something with the thing called TPM. Blog done!

Were Done GIFs - Get the best GIF on GIPHY

No, I am just kidding! But before we continue, I recommend you read these next few blogs first… I know, I know, it could be a lot to digest… but I guess it’s worth the time (and maybe the brain freeze?).

Autopilot White Glove Pre-Provisioned Deployment Flow (call4cloud.nl)

How does device based Conditional Access work? (call4cloud.nl)

Azure Ad joined vs Azure Ad Registered | AADR vs AADJ (call4cloud.nl)

To start with a small summary from the blogs above, we can assume that the MS-Organization-Certificate AKA the Device Certificate is quite important. Without that certificate, there will be no communication, whatsoever!

2. The Situation before

Let’s start with getting to know the situation before we decide to swap the system boards. To do so, we need to take a look at some device details. First with the use of DSRegcmd /status

Afbeelding met tekst  Automatisch gegenereerde beschrijving

In the picture above, we will notice that the device is, of course, TPM-protected. It will show you the device ID and also the Thumbprint of the important Device Certificate. A small warning before you pull out the existing system boards and replace them: please make sure you turn Bitlocker off.

Afbeelding met tekst  Automatisch gegenereerde beschrijving

Or make 100% sure you have a working recovery key. If you don’t have those, you will end up in the Bitlocker recovery console to enter your recovery key. You can guess what you must tell the customer when you don’t have the recovery keys available.

Also, please note the serial number by entering the command WMIC BIOS GET SERIALNUMBER. This way, you can be sure to remove the old hardware hash from the allow list. I will tell you why in the important stuff-to-know part!

3. The Situation after (user Perspective)

Okay, so we replaced the device its system board, booted up the device, and logged in. Yes, you read it right! We can still log in with our Azure Ad account, Even while the whole device trust is blown.

Do you know what’s funny? We can even still log in with an Azure Ad User who has never logged in to the device before. Why? Because the Device Certificate is still available and with it, the Azure Ad Join is still a little bit alive.

Beware, because after logging in you will be prompted with some errors, that’s for sure. This warning will be fully portrayed when you log in. You will need to contact your IT admin.. I guess it’s a good thing that you are the IT admin who is replacing the system board!

Afbeelding met tekst  Automatisch gegenereerde beschrijving

Luckily, everything you will try to access without your device being trusted will be blocked, and a nice error will be shown. I will guide you through a few.

3.1 Company Portal

Let’s start with the famous company portal. This app is just fantastic. As always, I have written a blog about it.

Sharpe’s Company Portal | Offline (device) vs Online (user) (call4cloud.nl)

You can open the company portal yourself. Good luck with that! A nice login error will occur.

3.2 Opening Office

Also, opening the Office 365 Apps will just prompt you for your credentials/sign-in instead of signing you in with the nice PRT SSO functionality you got before the System board replacement.

3.3 Opening OneDrive

But I am not done yet, as I also need to show you what beautiful errors you will get when opening OneDrive. This will result in a nice error 80090016

your computer's trusted platform module has malfunctioned. if this error persists, contact your system administrator with the error code 80090016

Also, another warning will be shown, telling you there was a problem signing you in with the error 0x8004deb4

Afbeelding met tekst  Automatisch gegenereerde beschrijving

4. The Situation (In the IT Admin perspective)

Now we have witnessed the nice errors the end-user could notice when he logged in, we are also going to take a better look at what a good IT admin could notice.

4.1 Dsregcmd /status /debug

I guess this command is well-known by every IT pro that is doing some Azure Ad troubleshooting. So let’s see what it is telling us as the IT admin!

performing dsregcmd /status /verbose to get some more details about the device state gets us: Error PrivateKeySigntest 0x80090016 (isNGcTransportKeyerror: False)  DeviceAuthStatus : FAILED, Error:8007013d

You will notice multiple errors in this picture above, and every error is telling you something is really broken. Let’s start with these two:

Error PrivateKeySigntest 0x80090016 (isNGcTransportKeyerror: False)

DeviceAuthStatus : FAILED, Error:8007013d

Please note: The DeviceAuthStatus field was added in the Windows 10 May 2021 update (version 21H1).

Mmm, again, that 80090016 error…. And the Private KeySignTest error, doesn’t sound too good. You will also notice the Failed sign key test when looking at the diagnostic data fields.

Afbeelding met tekst  Automatisch gegenereerde beschrijving

4.2 The Famous Device Certificate

As every screenshot and almost every error tell us there is something wrong with the Private Key or transport keys, shall we check if the MS-Organization-Access (aka device certificate) still looks valid?

Because if you have been reading my older blog about Autopilot and the Lost Azure Ad Join and especially part 8, you will know that without this device certificate your Azure Ad Join is screwed! So, I guess it’s very important you don’t mess with it or delete it…

Broken Trust GIFs | Tenor

So, let’s take a look at the MS-Organization-Access certificate. It’s still there where it should be, and it does look like there are no missing private keys. The key icon is still there, as shown below.

Afbeelding met tekst  Automatisch gegenereerde beschrijving

4.3 Event logs

Almost forgot to mention the event logs. Everyone knows that looking at the event logs could really help you out, so let’s do so. Open the event log and take a good look at what the Nice AADTokenBroker event log tells us. A lot of nice errors can be discovered within all those red error messages.

the aad event log shows us the aadtokenbroker event 1098 with the error: 0x80090016: The keyset does not exist.

0x80090016: The keyset does not exist. The error code itself certainly does ring a bell or two, as we have seen that error pop up earlier! And again, does the error mention something about the Keyset missing?

And the next error will come!

Afbeelding met tekst  Automatisch gegenereerde beschrijving

Looking at the picture above, event 1098 and again, the 0x80090016 (or 0xc0090016) error warning shows us issues are getting a token silently.

aad cloud ap plugin is also showing the error 0xc0090016

4.4 MDMDiagnosticstool

DSregcmd and the mdmdiagnosticstool are useful when troubleshooting Azure Ad Join or Intune problems. As I showed in the TPM attestation series, you can also use this tool to obtain more information about the TPM.

So, let’s enter this nice command (mdmdiagnosticstool -area TPM -cab c:\temp\tpm.cab) to see if we can get some good results.

Element not found: 0x80070490

Beautiful, another error we can add to our collection: Element not found: 0x80070490

4.5 Windows Performance Analyzer

As I showed you in my last blogs that showed you how to start troubleshooting some nice TPM attestation errors, I was using the WPA. So why shouldn’t we use it now?

I started the WPR trace, logged off, and logged in again. After logging in, I waited a few minutes to be sure I had everything I needed and stopped the tracing. Let’s take a look at what the ETL file tells us.

the window performance anaylyzer log shows us the error certificate private key test failed

Certificate Private Key test failed… Funny, that almost looks like this error we’ve seen earlier

This error is also known as 2146893802 and the TPM operation failed or was invalid

5. The Wonderful Story behind it

I already sort of explained the Azure Ad Join process in the Willys White Glove wonderland blog, But I will focus a little bit more on the Device Certificate part this time. Because that certificate is of utmost importance for your Azure Ad Join.

I will do so to better understand who is responsible and what is needed to create the much-needed device certificate!

First, the end of the graphical flow when we are enrolling a nice new device into Azure Ad

And the details behind the flow, but I will explain it a little bit more:

1. The TPM Bound *Device Keys (DkPub/DkPriv) must be generated to start the request to retrieve the device certificate. After the devices keys are generated, a certificate request will be generated by using the DkPub and signed by the DkPriv

*Device Keys are used to identify the device itself

2. After the singing request is created successfully, an additional key pair will be created. This *Transport key (TKPub/TKPriv) will be used to make sure you get your SSO when authenticating to Azure AD and of course to validate the device state during PRT requests. This Transport key is derived from the Storage Root Key of the TPM.

*Transport keys are used to decrypt the session key.

*The Session key is an encrypted symmetric key, generated by the Azure AD authentication service, issued as part of the PRT and acts as proof of possession

3. A device registration request is sent to the Azure Device Registration Service (DRS). In the request, it will send the ID token, the Certificate Request (CSR), and the public part of the transport key (TkPub) along with its attestation data.

4. After Azure DRS receives the request with all the important data attached, the ID token will be validated and the corresponding device object will be created in Azure AD.(When using Autopilot white-glove it will be in a disabled state)

5. Azure DRS will send back the device certificate to the client, and the client will install the certificate in the personal certificate store. After this step, the MDM enrollment will start, but as this is not part of this blog… I will skip it

So, to summarize the flow, the TPM is responsible for creating the device certificate. Without the TPM that started the device certificate generation, the device will also lose access to the Device and Transport keys. Without these keys you will end up with a nice “Keyset does not exist” error 0x80090016 as I showed you in part 3 of this blog.

6. Solving the Broken Device Authentication?

I will divide this part into multiple subparts

  1. Trying to fix it
  2. The Results

6.1. Trying to fix it!

First, let’s try a funny thing and launch a dsregcmd /debug /join from an admin session to see if that will fix our issue with the missing keys.

I guess not because many errors will be thrown at us at once!

CryptAcquireCertificatePrivateKey failed 0x80090016

PrivateKeyAquireTest failed with error code 0x801c002c.

TestTransportKeyHealth failed with error code 0x80090011

That certainly doesn’t look good … But then again… I guess after you have read the flow from part 4, we know why it’s telling us the Transport and Private Keys are failing us. It’s simply because the TPM is changed, and the device bound Device Keys with that!

Okay, okay… We know it’s broken now; let’s fix it!

Let’s sign off from the broken Azure Ad account and log back in with a nice dedicated local admin account protected with LAPS… Once you found the proper credentials to log in, fire up a command prompt and run Dsregcmd /forcerecovery

If you don’t want to open a command prompt to force the recovery, we could also execute the AAD Recovery from the “Run” command. (ms-cxh://NTH/AADRECOVERY)

performing ms-cxh://NTH/AADRECOVERY to start the aad recovery process

This AADRECOVERY command is part of the dsreg.dll that will trigger the recovery itself.

After entering the recovery command, you will be prompted to log in with your Microsoft 365 credentials to start the AAD Recovery

Afbeelding met tekst
Automatisch gegenereerde beschrijving

Of course, please make sure you don’t have Device Enrollment Restrictions enabled, otherwise, you could end up with the error: 80180014 | DeviceNotSupported error

https://docs.microsoft.com/en-us/mem/intune/enrollment/enrollment-restrictions-set#blocking-personal-windows-devices?id=5004252

After a while, you will receive a nice prompt telling you it’s almost done. Please read it.

Afbeelding met tekst, schermafbeelding, binnen
Automatisch gegenereerde beschrijving

So do what they tell you to do!!! Sign out with your local admin account and immediately (without rebooting!!) log in with that account. You will notice everything is fixed, and your Device Authentication is working again.

6.2.The Results

Do you want to guess what happened when we forced a recovery? While forcing a recovery the “OLD” Device ID, will be removed from Intune. So when clicking on the device when you are performing the recovery, you will get a nice error: “Not Found” for a few moments.

But at the same time, the “NEW” Device ID you also notice in the dsregcmd will be attached to that same Device(Name)

So, everything assigned to “All Devices” will still work. For example, opening WU4B still tells us the policy is assigned to that specific device.

Clicking on the device brings us to the hardware overview and in it, you will find the new DeviceID and the serial number.

But beware even when it has the same device name… multiple device records will be created!

And we all know what that means… nothing good when you are targeting device configuration profiles based on the Autopilot Enrollment profile (which doesn’t target that device anymore)

7. What happens when you don’t have a TPM?

I guess that’s indeed an excellent question… But??? Why don’t you have a TPM? That isn’t smart at all, maybe just plain stupid 🙂

Well, enough said. Let’s examine what will happen when you replace the system board on an Azure Ad Joined device without using a TPM.

Before we replace the System Board, let’s check the dsregcmd status. As shown below, this device isn’t TPMprotected.

when the device has no tpm, dsregcmd ./status will show us tpmprotected:no

To be sure we do see some difference when we are changing the hardware, let’s fire up a cmd and type this command to get back our serial number: Get-WmiObject win32_bios | select Serialnumber

After we replace that virtual “System board,” let’s fire up the VM and see what happens. There is pretty much no difference, except the serial number changed.

Everything just works as expected. The device is still Entra Joined, and the DeviceAuthStatus is still showing as a success. Isn’t that great?

So, without a TPM (stupid idea, as a TPM greatly enhances the security of your Azure AD Joined device!), nothing breaks.

Afbeelding met tekst  Automatisch gegenereerde beschrijving

8. Important Stuff to know!

8.1: Rebooting the Device after the Recovery

If you have chosen to fix it manually instead of throwing away the device, you must ensure you are not rebooting it. When you are not logging out with the local admin account and logging in with the user account, you are rebooting the device. Guess what? The ESP will be shown in a state that’s pretty much stuck.

Afbeelding met tekst  Automatisch gegenereerde beschrijving

8.2: 4K HH Hardware Hash for Autopilot

Please, pretty please, when you are using Autopilot, you will need to make sure you are uploading the new 4K HH (Hardware Hash) to the trusted EkPub autopilot devices as I am explaining in this blog

Autopilot White Glove Pre-Provisioned Deployment Flow (call4cloud.nl)

Why? As the hardware hash will be different from the old one. I will try to explain a little bit more.

The hardware hash contains a lot of information unique to the device itself, like the *SmbiosUuid and SMbiosSystemSerialNumber

*SMbiosUUID: It’s a unique number bound to the system/motherboard and if you change that you can safely say you changed your computer. 

Afbeelding met tekst  Automatisch gegenereerde beschrijving

Of course, the Hardware Hash also contains some essential stuff about the TPM, like the famous EkPub! (Which we need when we need to do some AIK Attestation)

So, without this new important information about the hardware of the new system board, how could we still perform device authentication? As this device authentication is totally based on trust and the new device (TPM) isn’t the one, we imported earlier into the allowed/trusted list of EkPub’s.

And without this trust, you can’t enroll your device into Autopilot. You could check out what’s inside the Hardware Hash for yourself. To do so download the OEM Activation 3 Tool (OA3Tool) from this link

https://call4cloud.nl/wp-content/uploads/2021/12/oa3tool.zip

I already had the HardwareHash exported with the wonderful get-windowsautopilot info PowerShell tool, so I only needed to add the HardwareHash.

Please note: Even the hardware hash can be different each time you create it, why?

As shown above, it also contains the OsSystemTime and OsLocalTime. Luckily, these time details are NOT used for the Autopilot registration! Let’s move on to the oa3tool and start decoding it yourself!

oa3tool.exe /DecodeHwHash=”hardwareHash from the csv” > c:\temp\hh.txt

Afbeelding met tekst, fles, afbeelding  Automatisch gegenereerde beschrijving

When opening that text file, you will find a lot of useful stuff in it. As shown below.. it contains a lot of information!

8.3 Testing it yourself

It’s easy to reproduce what happens when a system board is replaced, use Hyper-V. First, I created a Virtual Machine

I added a virtual TPM to the device, and installed Windows 10 21h2 on the device itself, and uploaded the 4K HH

After the hardware hash was uploaded I reinstalled the device and enrolled it into Azure/Intune and made sure everything was working fine.

In the virtual machine picture, I showed you, you could have noticed I also created a second Virtual Machine (also with A TPM) and mapped the hard drive to the same VHDX file from the first machine we created!

So what happens when you shut down the first Virtual Machine and boot that second Virtual Machine? Yes indeed! It looks like the system board and the TPM has been replaced!

8.4 Deleting the Hardware Hash

I also have to point out that changing the system board on these devices is not my favorite option! I know that sometimes you need to deal with warranties, but then again… A way,way,way better option would be to remove the hash from the list of allowed Autopilot devices, buy a new device, and enroll that device!

WiffleGif

Because when the Hardware Hash isn’t removed from the tenant (one that you don’t control!), and that system board ends up in your device, you have some work to do… Because you will end up with the ZtdDeviceAssignedToOtherTenant (808) error message and/or ZtdProfileAssignedToOtherTenant.

ZtdDeviceAssignedToOtherTenant (808) 

You will end up creating a Microsoft Support ticket or asking the vendor to send a new one to get it fixed. When putting in a service ticket, please make sure you have the Device CSV, Proof of ownership and the Diagnostic logs ready for them.

Please read this MS Doc for more information:

Error 806 or 808 when importing CSV files – Intune | Microsoft Docs

Conclusions


I guess this conclusion can be short? When replacing your system board, the trust between your device and Azure will be broken because your TPM isn’t the one the device first married with!

Its Finished GIFs | Tenor

Again… buy a new device…. but when that’s not possible, you will need to fix the issue with the Device/Transport keys and the TPM, you can do so by using the dsregcmd /forcerecovery (but beware of all the group assignments that would break)

Another and better option would be to wipe the device from intune/azure, upload the new keys and reenroll the device! Just like Microsoft is telling us 🙂

Windows Autopilot motherboard replacement | Microsoft Docs

9 thoughts on “Married with System Boards’s: 976-TPM

  1. Hi Rudy, Thank you for a very interesting article! For me motherbord change is a fact of life… I have more then 7000 devices in my tenant – all of them Laptops, they break and one of the most common repair is a change of the motherbord. I have adapted a ‘procedure’ for that – i wipe the device (and hence remove it from Intune) if possible or just delete from Intune, I then remove the HW Hash from AutoPilot and remove the device from AAD (just to make sure) I am waiting a day for all that to sync and then revers the procedure by uploading the new HW hash etc. It is actually bit of a ‘pain in the but’ so to say as I can be sure to always get a ‘device allredy exist’ error when trying to import the new HW hash to autopilot. right now my devices are almost one year old and I am getting this error on one or two of them every time i am importing the HW hash on a group of computers ( I use to collect them and then run the procedure on about 5 – 6 at a time for the sake of effectivity…). When this happens, troubles begin because the only way to overcome that is by a Microsoft support case. Upload a proof of ownership, mdmdiagnostics cab report, the HW hash etc. it usually takes up to a week to resole this when they eventually remove the bords form where ever it is written. All that because of the use of refurbish boards – something that is well in use by the repair companies and the manufacturers. It is a bad procedure but i cannot see a way around it… I think this will only get worse with time. 🙁 best regards, Ido

    1. Hi.. I guess the Autopilot Auto HardwareMismatchRemediationData feature could help you when it will be ever released? as I am only noticing this in their documentation

      https://docs.microsoft.com/en-us/windows/client-management/mdm/windowsautopilot-csp

  2. Hi just started a new role with the most basic intune rights anyway the IT staff were saying they have a HP laptop which was domain joined and then added to intune cloud and that the machine ended up in another businesses tenant, i asked the hardware guy if there board was ever replaced and he also mentioned that the laptops come direct from HP he could be wrong there maybe it’s a 3rd party vendor and that they have shipped us a new Hp laptop which actually had a refurbished board possibly, anyway I’ll check with our boss on that , but this great article would explain the issue with the device being in someone else’s tenant

  3. Rudy,
    1) This link from July has screenshots of the new AutoPilot remediation. Maybe worth adding to your article.
    https://techcommunity.microsoft.com/t5/intune-customer-success/return-of-key-functionality-for-windows-autopilot-sign-in-and/ba-p/3583130

    2) Have you seen this work in the versions listed? (Do the version #’s even make sense to you? I think there might be some typos.)

  4. What a goldmine your blog is! KUDOS! Deep and thorough explanations.
    My Surface 8 Pro just felt like showing med the ☝️, not that; you know what I mean…
    Don’t know what happened, haven’t change mobo or anything like that. But non the less: 0x80090016. Without your explanation here I would have been stuck.
    So just a big thank you!

  5. Ridiculous, this has nothing to do with any form of (consumer) security. This is to avoid that the consumer is able to repair an owned device so you need to buy a whole new device and a bundled operating system if you are unable to this. This is a shame, this is a crime, this generating e-waste because dickheads wants to own your (expensive) device, dependency and slap some extra dollars out of it when defective or obsolete (too early). Disgusting.

    In the name of security for a few fools who may be possible ‘misbehave’, they will put everyone a chain on their feet. The excuse of safety.

  6. Hi.
    When I tried this week this first time, it worked like miracle.
    But now doing to this other client’s computer, when I sign in with users’s account to dsregcmd /forcerecovery it gives me error that device is already enrolled?
    Any suggestions what to do?

    Background: Computer is Autopilot computer with Bitlocker encryption, which Motherboard was changed, while Bitlocker was on and computer now gives TPM malfunction.

  7. …just buy a new device….. that has to be the most anti repair anti consumer pro profit margin statement today. thanks for reminding me why i hate MS so much.

Leave a Reply

Your email address will not be published. Required fields are marked *

4  +  4  =  

Proudly powered by WordPress | Theme: Wanderz Blog by Crimson Themes.